Hydromat HS16
S/N: HS16-35

• N/T Hydromat base with Epic electrical upgrade.
• Versions – Epic Application: 21.07.06 & PLC Ladder: 20.12.15
• 70 Gal Parker Hydraulic Power Pack Model # HPU11251-5 (28.5 GPM)
• Knoll VRF 500 Chip Conveyor
• Chuck Table Consists of 16 Geiger + Haag Self-Centering Horizontal Satellite Chucks (Double Sliders)
  
  • A Spare Set of 16 Geiger + Haag Single Slider Horizontal Satellite Chucks (1 Fixed & 1 Sliding Jaw)
• Ebbco Inline Chiller with Pump Model # PMF-60,000-IL (460 Volt/3 Phase)
• Fortville Parts Feeder System (Hopper, Elevator, Vibrating Bowl)
• Vertical Support (Spider) for 2-Axis CNC Flanges on stations 7V, 10V, and 13V

Station 1V: Fanuc LR Mate 200iD Robot Part Transfer Robot w/Schunk Gripper and Controller

Station 1H: Pneumatic Load Assist w/Schunk Gripper

Station 2H: Epic 50/100 Unit with Komet 17mm Stroke CNC Head (Unit Type 103.72)

Station 2H: 180° Horizontal Satellite Chuck Indexer

Station 3H: Epic 36/100 CF, HSK Unit (Unit Type 1)

Station 4H: Epic 36/100 HSK, FQ Unit & 2-Axis CNC flange X+30 / Y+30 (Unit Type 101.12)

Station 5H: Epic 36/100 HSK Unit (Unit Type 1)

Station 5H: 90° Horizontal Satellite Chuck Indexer

Station 6H: Epic 36/100 HSK, FQ Unit & 2-Axis CNC flange X+30 / Y+30 (Unit Type 101.12)

Station 6H: 90° Horizontal Satellite Chuck Indexer

Station 7H: Open Station / No Unit

Station 7H: 180° Horizontal Satellite Chuck Indexer

Station 7V: Epic 36/100 HSK, FQ Unit w/Benz 65° Drill head & 2-Axis CNC flange X+ 15 / Y+30 (Unit Type 101.12)

Station 8H: Epic 36/100 HSK Unit & 2-Axis CNC flange X+ 15 / Y+30 (Unit Type 101.12)

Station 9H: Epic 36/100 HSK Unit & 2-Axis CNC flange X+ 15 / Y+30 (Unit Type 101.12)

Station 10H: Epic 36/100 HSK Unit & 2-Axis CNC flange X+ 15 / Y+30 (Unit Type 101)

Station 10H: 180° Horizontal Satellite Chuck Indexer

Station 11H: Epic 50/100 Unit with Komet 17mm Stroke CNC Head (Unit Type 103.72)

Station 12H: Epic 36/100 HSK Unit & 2-Axis CNC flange X+ 15 / Y+30 (Unit Type 101)

Station 13H: Open Station / No Unit

Station 13H: 180° Horizontal Satellite Chuck Indexer

Station 13V: Epic 36/100 HSK, FQ Unit w/Benz 65° Drill head & 2-Axis CNC flange X+ 15 / Y+30 (Unit Type 101.12)

Station 14H: Epic 36/100 Pick-Off Unit

Station 15H: Epic 50/100 Unit with Komet 22mm Stroke CNC Head (Unit Type 103.72)

Station 16H: Pneumatic Unloader w/Schunk Gripper

Unit List:

• 1 - Fanuc LR Mate 200iD Robot with Controller
• 1 - Pneumatic Loader Assembly
• 1 - Pneumatic Unloader Assembly

• 2 - Epic 50/100 Units with Komet 17mm Stroke CNC Heads
• 1 - Epic 50/100 Unit with Komet 22mm Stoke CNC Head
• 1 - Epic 36/100 CF, HSK Unit
• 1- Epic 36/100 HSK Unit
• 2 - Epic 3-Axis 36/100 HSK Units with X+30 / Y+30 CNC Flanges
• 2 - Epic 3-Axis 36/100 HSK, FQ Units with 65° Benz Drill Heads and X+ 15 / Y+30 CNC Flanges
  
  • 2 Additional Spare 65° Benz Head Drill Heads Part # BID-037259
• 4 - Epic 3-Axis 36/100 HSK Units with X+ 15 / Y+30 CNC Flanges
• 1 - Epic 36/100 Pick-Off Unit
• 2 - 90° Horizontal Satellite Chuck Indexers (Located on stations 5 and 6)
• 4 -180° Horizontal Satellite Chuck Indexers (Located on stations 2, 7, 10, and 13) 

Machine Specs:

• Voltage 480 VAC
• Phase & Frequency 3 ph., 60Hz
• Main Disconnected Fuse Size 125 AMPS

Chucking Capacity:

• Blank: 4” Cube
• Round: 1.750”
• Workpieces Length: 8”