EMAIL
sales@graffpinkert.com
FAX
708.535.0103
PHONE
708.535.2200

Kitako MT4-200

Kitako MT4-200 CNC Multi-Spindle Lathe

mfd. 2006
with FANUC 18Ti (4-axis)
Control and all standard accessories, including:
(4) A2-6 Spindles (2 for turning, 2 for loading/unloading) - 2667 rpm max. spindle speed
(2) 20/15 HP Spindle Drive Motors
(2) Box Slideways for X and Z Axis
(2) 6.3 x 9.9" XZ Travels
(1) Servo Drive Spindle Carrier
-- Carrier Index, 2.5 sec./180 degrees, 2.0 sec./90 degrees
-- 28.35" dia. Curvic Coupling with 10,780 lbs Clamping Force
(2) 8-Station Drum Turrets with Piping for Coolant Through Tool
(4) Kitagawa 10" 3-Jaw Chucks
(1) Door Interlock
(2) Chip Air Blow Devices for the Loading Chucks
(2) Foot Switches
(1) Lift-Up Chip Conveyor
Machine Accessories:
(2) Max. Spindle Speed 2,667 rpm
(1) Staggered Threading, including:
-- Multiple Repetitive Cycle (required for staggered threading)
-- FS15 Format (required for staggered threading)
-- FANUC Installation (required for staggered threading)
(2) Spindle Orientation for the Loading Spindles
Gantry Loader, including:
(1) Gantry-Type 1-Arm/2-Hand Loader:
-- For AA/AA Loading
-- Part Flip-Over Station is Not Included
-- 90 deg. Index Hands x 2
-- XYZ Servo Driven
-- 4724 ipm/X, 1968 ipm/Z, 3937 ipm/Y Rapid Feed Rate
-- Loading Sequence is Programmable
-- Loading Area Safety Cover with Door Interlock
(1) Part Stacker with 12 Stations
-- 13.77" Part Stack Height per Station
-- 144 pc Part Queue (12 parts per station x 12 stations)
-- 39.6 min. Part Queue (144 parts x 16.5 sec. cycle time)
(1) Part Discharge Conveyor (approx. 60" long)
(2) Loader Tooling

Model: 
MT4-200
Brand: 
Manufacture Date: 
2006
Condition: 
Used

Vertical Tabs

Graff-Pinkert | 4235 W. 166th Street, Oak Forest, Illinois, USA 60452
Tel. 1-708-535-2200 | Fax 1-708-535-0103
Copyright © 2015 by Graff-Pinkert & Co., Inc., and its licensors. All rights reserved.
Best Chicago Web Design by MediaNut