INDEX R300
Mfd. 2012, and 2015
5-axis simultaneous machining on both spindles. Separate subsystems for upper and lower motorized milling spindles
Full rear side or parallel machining
Control: Modular multi-processor control with
15" flat screen INDEX C 200-4 D SL
(identical in construction to SIEMENS 840 D SL)
TECHNICAL DATA
Main spindle D 102
Spindle nose (DIN 55026/55021-ISO 702/1 size 8)
Material passage max. 102 mm
Drive power (100/40% ED) 34/46 kW
Speed range 1 - 3500 1/min
C-axis (resolution) 0.001°
Slide path (Z-axis) 610 mm
Counter spindle D 102
Spindle nose (DIN 55026/55021-ISO 702/1 size 8)
Material passage max. 102 mm
Drive power (100/40% ED) 34/46 kW
Speed range 1 - 3500 1/min
C-axis (resolution) 0.001°
Slide path (Z-axis) 610 mm
Slide path (X-axis) 780 mm
Tool carrier 1
X-axis (80 mm below spindle center) 580 mm
Y-axis + 140 mm
B-axis (direct drive torque motor)
Swivel angle 270°
Angle resolution 0.001°
Quill for Y- and B-axis (hydrostatic)
Diameter 240 mm
HSK-T 63 motorized milling spindle
Drive power 24.5 kW
Speed max. 9000 1/min
Tool system (DIN 69893) HSK-T 63
Arrangement of fixed tool positions
Number/recording (ISO 10889-1-30) 6/VDI 30
Tool carrier 2
Y-axis + 140 mm
B-axis (direct drive torque motor)
Swivel angle 270°
Angle resolution 0.001
EQUIPMENT/ACCESSORIES
Closed housing with automatic sliding door and air curtain on the sliding door window
window of the sliding door
C-axis on the main spindle
C-axis on the counter spindle
Tool carrier with HSK -T 63 motorized milling spindle
X-axis
Y-axis
B-axis
all axes direct path measuring systems
Internal and external coolant supply to the motorized milling spindle, separately switchable,
max. 80 bar,
2 tool strips on the tool carrier, each with 3 VDI 30 mounting holes for stationary tools;
Additional W-slots for increased repeat accuracy when changing tools
Drill breakage control for tool carriers 1 and 2
Chip conveyor (hinged belt) with lifting pump, discharge height 1250 mm
Portal removal unit, CNC-controlled, with actuated gripper and remnant disposal unit
Workpiece diameter max. 100 mm, workpiece length max. 250 mm
Conveyor belt from the machine
Short bar loading magazine IRCO ILS-RBK 10016
1 clamping device each on the main spindle and counter spindle
either HAINBUCH TOPlus Modular size 100
or HAINBUCH TOPlus Kombi Axfix size 100
(to be determined on delivery)
Various standard tool holders HSK-T 63
(to be specified on delivery)
Clsqrqlymu
Ehternet interface on the control cabinet
"MCIS DNC machine/SINDNC-FS" software package for NC data transfer in networked operation
Complete documentation