Eurotech Rapido B436-Y2

Eurotech Rapido B436-Y2Mfd. 2015Bar loaderChip Blaster ChillerHigh Pressure CoolantSPEC SHEET* MACHINING FIELDMax bar diameter 1.42 inDrawtube 1.48 in* MAIN SPINDLE (built-in type)Max spindle speed 7,000 RPMSpindle nose (flange type) 4.53 inDrawtube 1.81 inInside diameter of the 3 front bearings 2.95 inMotor power 15 HPMotor power at continuous rate 10 HP Constant power starting at 1,700 RPMMax torque 45.73 ft lbsCylinder thrust area for chucking 29.53 sq inCylinder stroke for chuck actuation 1.02 in MAXAdjustable chucking thrust from 72.52 to 435.11 PSI 5058.20 lbf MAX * SUB-SPINDLE DRIVE (built-in type)Max spindle speed 7,000 RPMSpindle nose (flange type) 4.53 inDrawtube 1.81 inInside diameter of the 3 front bearings 2.95 inMotor power 15 HPMotor power at continuous rate 10 HPConstant power starting at 1,7000 RPMMax torque 45.73 ft lbsCylinder thrust area for chucking 29.53 sq inCylinder stroke for chuck actuation 1.02 in MAXAdjustable chucking thrust from 72.52 to 435.11 PSI 5058.20 lbf MAX * UPPER CROSS-SLIDE ASSEMBLY Longitudinal slide (Z1-Axis)Max stroke 11.81 inBallscrew diameter/pitch 0.98/0.39 inMax rapid traverse 98.43 ft/min Transversal slide (X1-Axis)Max stroke 3.35 inBallscrew diameter/pitch 0.98/0.20 inMax speed 49.21 ft/min Vertical slide (Y1-Axis)Max stroke 1.97 in (+25/-25)Ballscrew diameter/pitch 0.98/0.20 inMax speed 49.21 ft/min 4/5/2016* LOWER CROSS-SLIDE ASSEMBLY Longitudinal slide (Z2-Axis)Max stroke 11.81 inBallscrew diameter/pitch 0.98/0.39 inMax rapid traverse 98.43 ft/min Transversal slide (X2-Axis)Max stroke 3.35 inBallscrew diameter/pitch 0.98/0.20 inMax speed 49.21 ft/min Vertical slide (Y2-Axis)Max stroke 2.97 in (+25/-25)Ballscrew diameter/pitch 0.98/0.20 inMax speed 49.21 ft/min * Z3-AXIS (longitudinal slide)Max stroke 13.39 inBallscrew diameter 0.98/0.39 inMax rapid traverse 98.43 ft/min * X3-AXIS (transversal slide)Max stroke 6.69 in (+85/-85)Ballscrew diameter 0.98/0.20 inHydraulic transversal stroke 0.59 in * TOOLHOLDING SYSTEMTool disc prepared to accept Eurotech toolsTool size 0.63 x 0.63 inBoring bar holder diameter 0.79 in * TURRET LIVE TOOLING SYSTEMLive tools motor power 3 HPTorque 16.23 ft lbsMax rotation of the standard live tools 6,000 RPM * NO. 2 “C” AXIS least input value 0.001° * HYDRAULIC SYSTEMTank capacity 6.6 galMotor power 3 HPMax pressure 580.15 PSI * LUBRICATION SYSTEMTank capacity 0.79 gal * COOLANT SYSTEMTank Capacity 52.83 gal 101.53 PSI pump (with 6.6 gal/min)Max pump delivery 15.85 gal/min 58.02 PSI pump (with 10.57 gal/min)Max pump delivery 31.7 gal/min * OVERALL POWER 54 HPCurrent absorption 70 A * WEIGHT and OVERALL DIMENSIONSHeight 74.41 inDepth 55.51 inLength with chip conveyor 149.6 inHeight against the spindle 39.96 inNet weight of the standard machine 10,362 lb * FEED 400V 50 Hz * SOUND POWER OUTPUTAirborne noise has been measured according to International Standard ISO/DIN 4871.3Edition 13.01.95 and machining as per Standard ISO/DP 8525Sound pressure level in dBA:- dry run 66.3- turning 69.3- Measurement uncertainty: 3dBA