Mitsubishi CNC Multi-Spindle Automatic, Model M-T42E

Mitsubishi CNC Multi-Spindle Automatic Screw Machine. 6-spindles. 42mm collets. High pressure coolant equipment, Spindle angular bearings for 3,500 rpm,Universal Chip Conveyor,X,Z combination cross slide, position 1, 2Rigid tapping attachment, position 3, 4, 5Polygon milling attachment, position 4, 5Pickup attachment with air blow unit, position 6Parts chute with air cylindar X Bar length 3,658mm,Spindle speed 2,800 rpm.Fanuc 15TTA Control. 12 axes, 6 systems with X and common Z (end tool slide). Tool nose radius compensationCutter radius compensationtool offset memoryNo. of tool offsets, 32Incremental offsetTool offset compensation All slides numerically controled and programmable. Spindle drive and tool slides can be quickly changed to different setups without changing gears or cams. Indexing repeatability accurate to 0.0001". INDEPENDENT SLIDE,  Z-Axis (Optional for up to 3 positions of positions  3,4,5 and 6)  Accel reaming, threading sub-spindle pick-up and boring or milling     -   Output of motor                                                        AC Servo motor, 75 kW (1hp)     -   Stroke                                                                         150mm (5.9”)     -                   Rapid traverse                                                                  18m/min. (708 ipm)     Sub-spindle, Y-axis, optional for position 6         (6)       CHUCKING AND STOCK FEEDING     -   Stock feed                                                                     120mm (4.7”)    (7)       WEIGHT (base machine only)                                                        10,000kg (22,025lbs) * Feed Function        -  Linear interpolation        -  Multi-quadrant circular interpolation        -  Inch/Metric conversion        -  Automatic acceleration/deceleration  -  Rapid traverse override                                1, 25, 50, 100%        -  Feedrate override                                                                  0-150% (every 10%)        -  Exact stop        -  Exact stop mode        -  Cutting mode        -  Dwell, revolutions or minutes        -  Diameter or radius command, set by parameters        -  Equal lead threading        -  Continuous threading        -  Feed per revolution  Â