INDEX R300 Mfd. 2012

INDEX R300 Mfd. 2012 5-axis simultaneous machining on both spindles. Separate subsystems for upper and lower motorized milling spindles Full rear side or parallel machining Control: Modular multi-processor control with 15" flat screen INDEX C 200-4 D SL (identical in construction to SIEMENS 840 D SL) TECHNICAL DATA Main spindle D 102 Spindle nose (DIN 55026/55021-ISO 702/1 size 8) Material passage max. 102 mm Drive power (100/40% ED) 34/46 kW Speed range 1 - 3500 1/min C-axis (resolution) 0.001° Slide path (Z-axis) 610 mm Counter spindle D 102 Spindle nose (DIN 55026/55021-ISO 702/1 size 8) Material passage max. 102 mm Drive power (100/40% ED) 34/46 kW Speed range 1 - 3500 1/min C-axis (resolution) 0.001° Slide path (Z-axis) 610 mm Slide path (X-axis) 780 mm Tool carrier 1 X-axis (80 mm below spindle center) 580 mm Y-axis + 140 mm B-axis (direct drive torque motor) Swivel angle 270° Angle resolution 0.001° Quill for Y- and B-axis (hydrostatic) Diameter 240 mm HSK-T 63 motorized milling spindle Drive power 24.5 kW Speed max. 9000 1/min Tool system (DIN 69893) HSK-T 63 Arrangement of fixed tool positions Number/recording (ISO 10889-1-30) 6/VDI 30 Tool carrier 2 Y-axis + 140 mm B-axis (direct drive torque motor) Swivel angle 270° Angle resolution 0.001 EQUIPMENT/ACCESSORIES Closed housing with automatic sliding door and air curtain on the sliding door window window of the sliding door C-axis on the main spindle C-axis on the counter spindle Tool carrier with HSK -T 63 motorized milling spindle X-axis Y-axis B-axis all axes direct path measuring systems Internal and external coolant supply to the motorized milling spindle, separately switchable, max. 80 bar, 2 tool strips on the tool carrier, each with 3 VDI 30 mounting holes for stationary tools; Additional W-slots for increased repeat accuracy when changing tools Drill breakage control for tool carriers 1 and 2 Chip conveyor (hinged belt) with lifting pump, discharge height 1250 mm Portal removal unit, CNC-controlled, with actuated gripper and remnant disposal unit Workpiece diameter max. 100 mm, workpiece length max. 250 mm Conveyor belt from the machine Short bar loading magazine IRCO ILS-RBK 10016 1 clamping device each on the main spindle and counter spindle either HAINBUCH TOPlus Modular size 100 or HAINBUCH TOPlus Kombi Axfix size 100 (to be determined on delivery) Various standard tool holders HSK-T 63 (to be specified on delivery) Clsqrqlymu Ehternet interface on the control cabinet "MCIS DNC machine/SINDNC-FS" software package for NC data transfer in networked operation Complete documentation Photos are a mix between 2012 and 2015 machines