INDEX MS22-8

INDEX MS22-8 Mfd. 2013 1 INDEX C200-4 D SL control 2 NCU - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm Control: INDEX C200-4 D SL controller With IEMCA SIR Bar Feed (10ft) 1 Pickup Attachment - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - 1.1 Slide units: X and Z axes controlled by CNC - 1.2 slide units: X and Z axes controlled by CNC - 2.1 slide units: X and Z axes controlled by CNC - 2.2 slide units: X and Z axes controlled by CNC - 3.1 slide units: X and Z axes controlled by CNC - 3.2 slide units: X and Z axes controlled by CNC - 4.1 slide units: X and Z axes controlled by CNC - 4.2 slide units: X and Z axes controlled by CNC - 5.1 slide units: X and Z axes controlled by CNC - 5.2 slide units: X and Z axes controlled by CNC - 6.1 Slide units: X and Z axes controlled by CNC - 6.2 slide units: X and Z axes controlled by CNC - 7.1 Slide units: X and Z axes controlled by CNC - 7.2 slide units: X and Z axes controlled by CNC - 8.1 slide units: CNC-controlled swivel axes and Z-axes - 8.2 slide units: X and Z axis controlled by CNC - 1 set of draw collet holders - 1 bar loading magazine IEMCA SIR MS 22.8/33/F bundle with drilling station - 1 synchronous spindle in SL 8.1 with flushing and ejector as well as jaw chuck - Back drilling station for 3 fixed tools in SL 7.1 or 8.2 - 1 workpiece removal through a chute in SL 8 with a conveyor belt within the machine - 1 preparation for air/oil lubrication for drive devices - 1 electrical preparation, double module for SL 1,2,3 and 4 with electronic shaft - 1 electrical preparation, double module for SL 5,6,7 and 4 with electronic shaft - 1 flap for suction - UNICOOL EA interface - UNIMESS interface - 16 freely programmable inputs and outputs - CO2 fire extinguishing system - Hinged belt conveyor - High pressure pump - Preparation for central cooling water supply - 6 double holders - 6 base plates - 1 catch - 2 The engine Operated from 2013 to 2020 in 2 shifts from Monday to Friday, and since 2020 in a single shift from Monday to Friday. Ran Traditional S300PB free-cutting steel