INDEX MS22C

INDEX MS22C Mfd. 2015 Index control C200-SL with single NCU Machine control panel equipped with a flat screen 47 cm Carriage unit 1.1 X-axis and Z-axis NC controlled Slide unit 1.2X axis rigid, Z axis NC controlled Slide unit 2.1X axis rigid, Z axis NC controlled Carriage unit 2.2 X-axis and Z-axis NC-controlled slide unit 3.1 X-axis and Z-axis NC-controlled slide unit 3.2X-axis NC controlled, Z-axis manually adjustable on X-axis and Z-axis NC-controlled slide unit 4.1 X axis and Z axis NC controlled slide unit 4.2X axis NC controlled, Z axis manually adjustable on X axis and Z axis NC controlled Carriage unit 5.1 X axis and Z axis NC controlled slide unit 5.2X axis NC controlled, Z axis manually adjustable on X axis and Z axis NC controlled Carriage unit 6.1 Swivel axis and Z-axis NC controlled UNIMAG – Interface for connecting a bar loading magazine Synchronizing device Position 6.1 with workpiece ejection device and preparation for coolant supply through the synchronous spindle Hainbuch Spanntop Axfix D22 for synchronous spindle Rear processing device on slide position 6.2 for max. three drill holder pieces fixed tools Oil/air lubrication for tool holders for one to a maximum of six units Electrical preparation for an additional drive with an electronic shaft (position-synchronous operation to the main and counter spindle) Can be used for all additional drives with incremental encoders. single module Electrical preparation for an additional drive without an electronic shaft, only speed-controlled. single module High-frequency spindle with accessories (SycoTec) Hinged belt chip conveyor 800 mm discharge height Cooling lubricant tank, capacity 800 liters Vacuum rotation filter, capacity 650 liters Heat exchanger pump 80 litres/min 7 bar low pressure pump 300 litres/min 4 bar high pressure pump 55 litres/min 40 bar IEMCA SIR MS22/33/P area loader, bar length 3300 mm fire extinguishing system oil suction cooling unit